EN
FR- Easy to use
- Machine applicable, pumpable at distances over 100 meters
- High adhesion to the substrate
- Quick hardening and drying
- Quick installation of the coating
- Hardens without shrinkage
Whether it is to create a new floor or to install a new garden shed, a screed will be necessary to ensure an optimal base for your construction. It is advisable to call on an experienced mason to ensure the sustainability of the project.
Adherent cementitious screeds used as a finished floor can only be used for the low load group. Hard concrete floor coverings and cement-resin floor coverings can be subjected to low to heavy load groups. Its thickness is reduced, it allows a larger surface to be covered without an expansion joint. Its result is smooth and without deformation.
Note: this type is regularly used for all types of wet rooms: cellar, laundry room, garage, balcony, terrace.
Adherent screeds consist of cement, aggregates and water, with or without additives or additions. It can be used for parking lots with a surface hardener and even tinted with different colors.
The Floating Screed is placed on the interposition layer which acts as an intermediary between the initial support of the part and the new surface. This layer consists of thermal insulation or a polyane film, which considerably reduces the energy losses of the house. Furthermore the floating screed remains mandatory when installing a heated floor. It therefore represents an additional asset which serves to thermally insulate all the premises. Its thickness and quality vary according to needs. It will be reinforced with a reinforcing mesh or fibers.
It can be cement-based or anhydrite-based.
The Self-Leveling Liquid Screed is done by pouring. It provides better initial and final resistance, its thickness is reduced compared to the standard. It's installation is fast and the surface finish is perfect thanks to the sanding carried out by us after 7 days.
Note: this type should not be in contact with humidity such as cellar, laundry room or other.
Liquid Anhydrite Type 830 screed
Anhydrite 850 mortar screed
Self-leveling patch is a finishing method in construction and renovation. It consists in applying a coating in order to correct the various defects of the ground. The goal is to have a flat and clean floor before laying a floor covering.
Advantages:
Scope:
We are of course at your disposal to advise you and help you choose the coating you need for your home.
Topcem is a special hydraulic binder with normal setting. This screed dries in 24 hours and allows a quick coating. Allow 3 days before laying a tiling and 7 days for a parquet or plastic coating.
Advantages:
Scope:
Mapecem is a special hydraulic binder with quick setting and drying.
Advantages:
Scope:
Admixture based on acrylic resins with strong water reduction.
Advantages:
Scope: